The VARG MX & EX Factory Edition are here, our most performance focused VARGs yet, available now in limited numbers. This is the closest you can get to the way we race. Everything we have learned across Supercross, SuperEnduro, EnduroGP, the Hard Enduro World Championship and Erzberg have gone straight into the making of these Factory Edition VARGs.

The headline is the suspension. For the first time we are putting a full KYB Factory A Kit on a production bike, the same suspension factory race teams rely on, and you feel the difference the moment you ride. More grip, more precision, and a bike that stays balanced and follows the terrain so you go faster with less effort.

There is more. Titanium foot pegs, a titanium bolt kit, a high grip seat, and our new Dynamic Traction Control to fine tune rear grip for any terrain so you get on the power sooner and stay in control when it gets tricky. It comes in two editions, both limited.

The MX Factory Edition in exclusive Stark Red, built for riders who want the full race feel. The EX Factory Edition in exclusive Forest Grey, with protection as standard and full road homologation, for maximum control when the terrain turns unpredictable.

Only 200 MX and 300 EX will ever be built. One global production run, then they are gone. If you want the highest performance motocross or enduro bike we have ever made, this is it. Order yours now at starkfuture.com or from your local dealer and subscribe for everything still to come!

The VARG already delivers championship-winning performance. The Factory Editions build on that platform with race-developed suspension, reduced weight, greater control, and the components selected by Stark Future Racing Director Sébastien Tortelli.

At the center of both limited editions is a complete KYB Factory A-Kit suspension package, supported by titanium components, Dynamic Traction Control, a high-grip seat, and a series of detail refinements designed around one objective: giving riders more confidence to unlock more of the VARG's existing performance.

The Factory Editions will be produced in a single global production run, limited to 200 VARG MX Factory Editions and 300 VARG EX Factory Editions worldwide.

Race Developed. Factory Equipped.

The VARG has never stopped evolving.

Every test, every race, and every lesson learned from Racing has gone back into the VARG. From FIM World Supercross and Arenacross to FIM SuperEnduro, EnduroGP, the FIM Hard Enduro World Championship, and Erzbergrodeo, competition has supported Stark Future to refine how the VARG delivers its performance.

The objective has always remained the same: make the VARG faster, easier to ride, and give the rider more confidence.

The VARG MX and EX Factory Editions are the result of that work. They are not cosmetic packages. Every component has been selected to improve grip, precision, control, or the rider's ability to use more of the motorcycle's performance.

The Hero Upgrade: Full KYB Factory A-Kit Suspension

Suspension is the most significant upgrade on both Factory Editions.

For the first time in the industry, a manufacturer is offering a complete KYB Factory A-Kit suspension package on a production motorcycle. The Stark VARG MX and EX Factory Editions come equipped with the full Kashima-coated KYB Factory A-Kit, bringing factory race suspension directly from the paddock to the showroom.

The result is more grip, greater precision, and improved control across changing terrain. The motorcycles remain more composed under braking, track the ground more accurately, and give riders the confidence to carry speed, accelerate earlier, and ride harder with less effort.

Key suspension features include:

• KYB Factory Kit 48 mm closed-cartridge, air-oil separated coil-spring fork.

• Hard-anodized internals and DLC-coated inner tubes to reduce friction.

• Mid-speed valve for a broad range of adjustment.

• Custom spring collar for improved front-wheel control and greater comfort on landings.

• Triple-adjustable KYB rear shock with Kashima-coated body and DLC-coated piston rod.

• X-Trig preload adjuster for faster and more precise sag setup.

The MX Factory Edition offers 310 mm of front travel, while the EX Factory Edition uses an enduro-specific setup with 300 mm of front travel. Both motorcycles provide 303 mm of rear travel.

Factory-Level Components. Less Weight. More Control.

Every supporting component has been selected to help the rider exploit the suspension and the performance already available from the VARG platform.

The Factory Editions feature:

• Exclusive CNC-machined triple clamps, individually numbered from 1 to 500.

• 3D-printed titanium footpegs, saving approximately 140 g.

• Titanium bolt kit, saving approximately 900 g.

• High-grip seat.

• Hand-operated rear brake, subject to regional homologation requirements.

• 80 hp ALPHA drivetrain.

• Dynamic Traction Control integrated into the ride modes.

• CNC-machined aluminum triple clamps with conical handlebar mounts.

• Improved Bio PA6 radiator fan holder.

Together, the titanium components reduce weight by more than 1 kg. The lower mass contributes to quicker direction changes, greater agility, and a more responsive connection between the rider and the motorcycle.

Dynamic Traction Control allows riders to fine-tune rear-wheel grip for different terrain, conditions, and riding styles. It helps riders find traction more consistently, accelerate earlier, and maintain control when grip becomes unpredictable.

VARG MX Factory Edition

The VARG MX Factory Edition is designed for riders looking for the closest production interpretation of Stark Future's race-developed motocross setup.

Finished in exclusive Stark Red Factory Edition graphics, it combines the latest 7.2 kWh VARG platform with the full KYB Factory A-Kit, lightweight titanium components, and Dunlop MX34 tires.

The suspension, reduced weight, and increased rider contact work together to provide greater precision entering corners, improved stability through braking bumps, and more confidence when getting back on the power.

It is not about adding more power. It is about giving the rider more confidence to use the performance already there.

VARG EX Factory Edition

The VARG EX Factory Edition applies the same philosophy to enduro.

Finished in exclusive Forest Grey Factory Edition graphics, it combines the 80 hp VARG EX platform with the full KYB Factory A-Kit, enduro-specific suspension settings, Dunlop Geomax EN91 tires, front and rear disc protection, and hand protectors.

It is built to remain composed across technical singletrack, hard enduro terrain, high-speed stages, and long days on the motorcycle.

The EX Factory Edition also retains full road homologation, combining race-developed performance with the versatility required for road-legal enduro riding.

Developed with Sébastien Tortelli

Sébastien Tortelli, Racing Director at Stark Future, said:

"Racing and developing championship-winning motorcycles has been my life's work. Since joining Stark, we have continued to improve the VARG through testing and competition at the highest level. Every race has taught us something, and everything we have learned has gone back into the motorcycle.

The VARG already has the performance. With the Factory Editions, the focus was to give riders more grip, more precision, and more confidence to unlock more of that performance.

These are built exactly how I would build my own."

Strictly Limited Global Production

The VARG MX and EX Factory Editions will each be produced once, in a single global production run.

• VARG MX Factory Edition: 200 units worldwide.

• VARG EX Factory Edition: 300 units worldwide.

Pricing, and Availability

VARG MX Factory Edition pricing: 15,990EU / 15,990USD / 13,990GBP / 23,990AUD / 20,990CAD
VARG EX Factory Edition pricing: 16,990EU / 16,990USD / 14,990GBP / 25,990AUD / 22,490CAD

Available at any Stark Premium Dealerships or on StarkFuture.com

Stark Future

VARG MX Factory Edition

Technical Specifications

Motorcycle

Stark VARG MX Factory Edition

Color / Graphics

Stark Red, "Factory Edition" graphics

Motor

Electric SPMAC, carbon-fiber housing 360 V

Battery

7.2 kWh, 420 V

Charger

Portable charger, 3.3 kW, 16 A, 120/240 V

Charging time

3.5 h @ 120 V / 2 h @ 240 V

Drive

RK MXU UW-ring Gold 520 chain & 7075 T6 rear sprocket

Power

80 hp

Torque

978 Nm on the rear wheel

Frame

High-strength steel

Suspension

KYB Factory Kit. Front: 48 mm closed-cartridge coil-spring fork, 310 mm travel. Rear: triple-adjustable shock, 303 mm travel. Kashima-coated, DLC-coated, X-Trig preload adjuster.

Front brake

Brembo 2-piston caliper, 260 mm disc

Rear brake

Brembo 1-piston caliper, 220 mm disc

Tires

Dunlop MX34, Stark Power Tubes. Front 80/100-21, Rear 110/90-19

Rake

27.3°

Wheelbase

148.7 cm

Ground clearance

33.9 cm

Seat height

96.0 cm

Footpegs

3D-printed titanium footpegs (-140 g)

Bolts

Titanium bolt kit (-900 g)

Seat

Grip seat

Triple clamps

CNC aluminum with conical handlebar mounts

Kill switch

Right-hand-side CNC kill switch

Radiator fan holder

Improved Bio PA6 radiator fan holder

Traction control

Dynamic Traction Control, included in ride modes

Stark Future

VARG EX Factory Edition

Technical Specifications

Motorcycle

Stark VARG EX Factory Edition

Color / Graphics

Forest Grey, "Factory Edition" graphics

Motor

Electric SPMAC, carbon-fiber housing 360 V

Battery

7.2 kWh, 420 V

Charger

Portable charger, 3.3 kW, 16 A, 120/240 V

Charging time

3.5 h @ 120 V / 2 h @ 240 V

Drive

RK MXU UW-ring Gold 520 chain & 7075 T6 rear sprocket

Power

80 hp

Torque

1036 Nm on the rear wheel

Frame

Chromoly steel

Suspension

KYB Factory Kit. Front: 48 mm closed-cartridge coil-spring fork, 300 mm travel. Rear: triple-adjustable shock, 303 mm travel. Kashima-coated, DLC-coated, X-Trig preload adjuster.

Front brake

Brembo 2-piston caliper, 260 mm disc

Rear brake

Brembo 1-piston caliper, 220 mm disc

Tires

Dunlop Geomax EN91 Medium, Stark Power Tubes. Front 90/90-21, Rear 140/80-18

Rake

26.1°

Wheelbase

148.8 cm

Ground clearance

36.8 cm (fully extended) / 34.5 cm (static sag)

Seat height

99.0 cm (fully extended) / 96.6 cm (static sag)

Footpegs

3D-printed titanium footpegs (-140 g)

Bolts

Titanium bolt kit (-900 g)

Protectors

Front / rear disc protectors, hand protectors

Seat

Grip seat

Triple clamps

CNC aluminum with conical handlebar mounts

Radiator fan holder

Improved Bio PA6 radiator fan holder

Homologation

L3e-A1E, max. speed 129 km/h

Traction control

Dynamic Traction Control, included in ride modes